A
-
Aerosol modeling
Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
-
ANSYS Workbench
Theory and Experiment in Predicting the Strength of Hybrid Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
-
Applied System Identification
A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
-
Applied System Identification
A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
-
Archimedes hydro screw turbine
Numerical Study of the Hydrodynamic Behavior of an Archimedes Screw Turbine by Experimental Data in order to Optimize Turbine Performance: The Genetic Algorithm [Volume 9, Issue 4, 2023, Pages 1060-1075]
-
Artificial Dissipation
Performance Investigation of Simple Low-dissipation AUSM (SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
-
ASTM D3039M-17
Theory and Experiment in Predicting the Strength of Hybrid Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
-
AUSM+UP
Performance Investigation of Simple Low-dissipation AUSM (SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
-
Automated driving
A Novel Flexible Lane Changing (FLC) Method in Complicated Dynamic Environment for Automated Vehicles [Volume 9, Issue 2, 2023, Pages 318-331]
B
-
Bayesian inference
Self-damping of Optical Ground Wire Cables: A Bayesian Approach [Volume 9, Issue 1, 2023, Pages 205-216]
-
Bayesian optimization
A Bridge Vibration Measurement Method by UAVs based on CNNs and Bayesian Optimization [Volume 9, Issue 3, 2023, Pages 749-762]
-
Bernoulli-Euler beam
Bernoulli-Euler Beam Unsteady Bending Model with Consideration of Heat and Mass Transfer [Volume 9, Issue 1, 2023, Pages 168-180]
-
BESO
A Novel BESO Methodology for Topology Optimization of Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
-
Bi-Directional Functional Graded
Static Buckling of 2D FG Porous Plates Resting on Elastic Foundation based on Unified Shear Theories [Volume 9, Issue 1, 2023, Pages 239-258]
-
Blade Optimization Design
Sweep Blade Design for an Axial Wind Turbine using a Surrogate-assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
-
Blood flow
Power Law Nanofluid through Tapered Artery based on a Consistent Couple Stress Theory [Volume 9, Issue 3, 2023, Pages 623-636]
-
Blood flow
Analytical Investigations for the Joint Impacts of Electro-osmotic and Some Relevant Parameters to Blood Flow in Mildly Stenosis Artery [Volume 9, Issue 1, 2023, Pages 274-293]
-
Boundary element method
Effect of Magnetic Field on Viscous Flow through Composite Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
-
Bridge vibration
A Bridge Vibration Measurement Method by UAVs based on CNNs and Bayesian Optimization [Volume 9, Issue 3, 2023, Pages 749-762]
-
Brinkman equation
Effect of Magnetic Field on Viscous Flow through Composite Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
-
Brinkman layer
Effect of Magnetic Field on Viscous Flow through Composite Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
-
Buckets dimensioning methodologies
Fluid-dynamic Simulations for Assessment of Dimensioning Methodologies of Pelton Turbine Buckets Considering the Initial Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
-
Buckling
Static Buckling of 2D FG Porous Plates Resting on Elastic Foundation based on Unified Shear Theories [Volume 9, Issue 1, 2023, Pages 239-258]
-
Buckling
Buckling Behavior of Nanocomposite Plates with Functionally Graded Properties under Compressive Loads in Elastic and Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
-
Burgers' Equation
A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
C
-
CFD
Numerical Modeling of Fluid’s Aeration: Analysis of the Power Losses and Lubricant Distribution in Gearboxes [Volume 9, Issue 1, 2023, Pages 83-94]
-
CFD
A Reduced-Order Simulation Methodology for Nanosecond-Pulsed Plasmas in a Backward-Facing Step Supersonic Combustor Configuration [Volume 9, Issue 1, 2023, Pages 181-194]
-
CFD
Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
-
CFD simulation
Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
-
CGAM System
A New Approach for Exergoeconomics Evaluation by Considering Uncertainty with Monte Carlo Method [Volume 9, Issue 1, 2023, Pages 15-24]
-
Chemical reaction
A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
-
Composite
Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
-
Computational fluid dynamics
Fluid-dynamic Simulations for Assessment of Dimensioning Methodologies of Pelton Turbine Buckets Considering the Initial Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
-
Computational Kinematics
Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
-
Concentrated photovoltaic thermal (CPVT)
Economic Evaluation of Supplying Commercial Thermal Load by a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
-
Conical shell
An Exact Analytical Solution for Heat Conduction in a Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
-
Conjugate heat transfer
CFD Analyses and Comparison of the Effect of Industrial Heat Sinks in Subsea Control System (SCS) [Volume 9, Issue 1, 2023, Pages 95-112]
-
Converging-diverging tubes
Mathematical Model of Fluid Flow and Solute Transport in Converging-diverging Permeable Tubes [Volume 9, Issue 4, 2023, Pages 900-914]
-
Correction effect
A Bridge Vibration Measurement Method by UAVs based on CNNs and Bayesian Optimization [Volume 9, Issue 3, 2023, Pages 749-762]
-
Corrosion
Calculation of Backscattered Ultrasonic Waves Field from a Copper-clad Steel Rod Immersing in Water and Effect of Clad Corrosion and Interfacial Disbond between Clad and Rod Defects on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
-
Corrugated cavity
Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid Nanofluid Natural Convection in a Partially Layered Porous Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
-
Couple stress theory
Power Law Nanofluid through Tapered Artery based on a Consistent Couple Stress Theory [Volume 9, Issue 3, 2023, Pages 623-636]
-
Crosswind
Numerical Simulations of Spoiler’s Effect on a Hatchback and a Sedan Car Exposed to Crosswind Effect [Volume 9, Issue 2, 2023, Pages 346-356]
-
Curing
Flow Structure when Filling a Channel with a Curable Liquid [Volume 9, Issue 1, 2023, Pages 195-204]
D
-
Damage criteria
Multimode Fatigue Criteria for Filled Non-crystalizing Rubber under Positive R Ratios [Volume 9, Issue 4, 2023, Pages 1049-1059]
-
Decision making
A Novel Flexible Lane Changing (FLC) Method in Complicated Dynamic Environment for Automated Vehicles [Volume 9, Issue 2, 2023, Pages 318-331]
-
Differential Integral Quadrature Method
Static Buckling of 2D FG Porous Plates Resting on Elastic Foundation based on Unified Shear Theories [Volume 9, Issue 1, 2023, Pages 239-258]
-
Discharge
A Note on the Discharge over Full-width Rectangular Sharp-crested Weirs and Weirs of Finite Crest Length [Volume 9, Issue 2, 2023, Pages 458-463]
-
Discharge Coefficient
A Note on the Discharge over Full-width Rectangular Sharp-crested Weirs and Weirs of Finite Crest Length [Volume 9, Issue 2, 2023, Pages 458-463]
-
Dispersion curves
Comparative Study of the Spectral Method, DISPERSE and Other Classical Methods for Plotting the Dispersion Curves in Anisotropic Plates [Volume 9, Issue 4, 2023, Pages 955-973]
-
Displacement
Impact of Memory-dependent Response of a Thermoelastic Thick Solid Cylinder [Volume 9, Issue 4, 2023, Pages 1135-1143]
-
Double intake manifold
Optimization of Spark Ignition Engine Performance using a New Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
-
Drag coefficient, Lift coefficient
Numerical Simulations of Spoiler’s Effect on a Hatchback and a Sedan Car Exposed to Crosswind Effect [Volume 9, Issue 2, 2023, Pages 346-356]
-
Droplet and particle collisions
2D Planar Simulation of Collisions between Liquid Droplets and Solid Particles in a Gas [Volume 9, Issue 3, 2023, Pages 678-694]
-
Dynamic mesh model
Fluid-dynamic Simulations for Assessment of Dimensioning Methodologies of Pelton Turbine Buckets Considering the Initial Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
-
Dynamics
Matrix Equations of the Motion of Multibody Systems with a Tree Structure in Hamiltonian Variables [Volume 9, Issue 4, 2023, Pages 1107-1121]
E
-
Economic evaluation
Economic Evaluation of Supplying Commercial Thermal Load by a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
-
Economic study
Numerical Study of the Hydrodynamic Behavior of an Archimedes Screw Turbine by Experimental Data in order to Optimize Turbine Performance: The Genetic Algorithm [Volume 9, Issue 4, 2023, Pages 1060-1075]
-
Effective shear stress
Multimode Fatigue Criteria for Filled Non-crystalizing Rubber under Positive R Ratios [Volume 9, Issue 4, 2023, Pages 1049-1059]
-
Effective tensile stress
Multimode Fatigue Criteria for Filled Non-crystalizing Rubber under Positive R Ratios [Volume 9, Issue 4, 2023, Pages 1049-1059]
-
Electrodeposition
Electrochemical and Mechanical Properties of Ni/g-C3N4 Nanocomposite Coatings with Enhanced Corrosion Protective Properties: A Case Study for Modeling the Corrosion Resistance by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
-
Electrolysis parameter
Electrochemical and Mechanical Properties of Ni/g-C3N4 Nanocomposite Coatings with Enhanced Corrosion Protective Properties: A Case Study for Modeling the Corrosion Resistance by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
-
Electromagnetic Casson nanofluid
Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
-
Electronic reliability
CFD Analyses and Comparison of the Effect of Industrial Heat Sinks in Subsea Control System (SCS) [Volume 9, Issue 1, 2023, Pages 95-112]
-
Elevated
Prediction of Interface Shear Strength of Heat Damaged Shear-keys using Nonlinear Finite Element Analysis [Volume 9, Issue 4, 2023, Pages 1000-1015]
-
Energy harvesting
Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
-
Energy storage rate
Heat Transfer Improvement in a Thermal Energy Storage System using Auxiliary Fluid Instead of Nano-PCM in an Inclined Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
-
E-nose
Smart Gas Sensors: Materials, Technologies, Practical Applications, and Use of Machine Learning – A Review [Volume 9, Issue 3, 2023, Pages 775-803]
-
Equivalence Ratio
Potential of Semi-Empirical Heat Transfer Models in Predicting the Effects of Equivalence Ratio on Low Temperature Reaction and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
-
Error-Based Proportional-Derivative Feedback Controller
Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
-
Even and uneven distributions
Even and Uneven Porosities on Rotating Functionally Graded Variable-thickness Annular Disks with Magneto-electro-thermo-mechanical Loadings [Volume 9, Issue 3, 2023, Pages 695-711]
-
Evolutionary algorithm
Sweep Blade Design for an Axial Wind Turbine using a Surrogate-assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
-
Exact Analytical study
An Exact Analytical Solution for Heat Conduction in a Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
-
Exergoeconomics Analysis
A New Approach for Exergoeconomics Evaluation by Considering Uncertainty with Monte Carlo Method [Volume 9, Issue 1, 2023, Pages 15-24]
-
Exergoeconomics Evaluation
A New Approach for Exergoeconomics Evaluation by Considering Uncertainty with Monte Carlo Method [Volume 9, Issue 1, 2023, Pages 15-24]
-
Experiment
Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
-
Experimental Modal Analysis
A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
-
Experimental Modal Analysis
A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
-
Experimental test
Optimization of Spark Ignition Engine Performance using a New Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
F
-
Finite difference method
Influence of Thermal Radiation on Heat Transfer through a Hollow Block [Volume 9, Issue 2, 2023, Pages 419-429]
-
Finite difference method
Mathematical Model of Fluid Flow and Solute Transport in Converging-diverging Permeable Tubes [Volume 9, Issue 4, 2023, Pages 900-914]
-
Finite element
Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
-
Finite element method
Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
-
Finite element method
Calculation of Backscattered Ultrasonic Waves Field from a Copper-clad Steel Rod Immersing in Water and Effect of Clad Corrosion and Interfacial Disbond between Clad and Rod Defects on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
-
Finite Element Models
Numerical and Experimental Investigation on Post-buckling Behavior of Stiffened Cylindrical Shells with Cutout subject to Uniform Axial Compression [Volume 9, Issue 1, 2023, Pages 25-44]
-
First-order Shear deformation plate theory
Stress-driven Approach to Vibrational Analysis of FGM Annular Nano-plate based on First-order Shear Deformation Plate Theory [Volume 9, Issue 3, 2023, Pages 637-655]
-
Fluid-structure interaction
Numerical Study of the Dynamic Response of Elevated Steel Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
-
Form function
Calculation of Backscattered Ultrasonic Waves Field from a Copper-clad Steel Rod Immersing in Water and Effect of Clad Corrosion and Interfacial Disbond between Clad and Rod Defects on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
-
Fracture
Delamination Analysis of Multilayered Functionally Graded Beams which Exhibit Non-linear Creep Behavior [Volume 9, Issue 4, 2023, Pages 935-944]
-
Free Flow
A Note on the Discharge over Full-width Rectangular Sharp-crested Weirs and Weirs of Finite Crest Length [Volume 9, Issue 2, 2023, Pages 458-463]
-
Free vibration
Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
-
Functionally graded
Buckling Behavior of Nanocomposite Plates with Functionally Graded Properties under Compressive Loads in Elastic and Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
-
Functionally graded material
An Exact Analytical Solution for Heat Conduction in a Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
-
Functionally graded material
Stress-driven Approach to Vibrational Analysis of FGM Annular Nano-plate based on First-order Shear Deformation Plate Theory [Volume 9, Issue 3, 2023, Pages 637-655]
-
Functionally graded material
Delamination Analysis of Multilayered Functionally Graded Beams which Exhibit Non-linear Creep Behavior [Volume 9, Issue 4, 2023, Pages 935-944]
-
Fuzzy differential equations
Numerical Simulation of Fuzzy Volterra Integro-differential Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
-
Fuzzy volterra integro-differential equations
Numerical Simulation of Fuzzy Volterra Integro-differential Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
G
-
Gas sensor arrays
Smart Gas Sensors: Materials, Technologies, Practical Applications, and Use of Machine Learning – A Review [Volume 9, Issue 3, 2023, Pages 775-803]
-
Gâteaux differential
An Alternative Procedure for Longitudinal Vibration Analysis of Bars with Arbitrary Boundary Conditions [Volume 9, Issue 1, 2023, Pages 294-301]
-
Generalized Hukuhara differentiability
Numerical Simulation of Fuzzy Volterra Integro-differential Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
-
General thermal boundary conditions
An Exact Analytical Solution for Heat Conduction in a Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
-
Genetic Algorithm
Numerical Study of the Hydrodynamic Behavior of an Archimedes Screw Turbine by Experimental Data in order to Optimize Turbine Performance: The Genetic Algorithm [Volume 9, Issue 4, 2023, Pages 1060-1075]
-
Glomerular capillary
Mathematical Model of Fluid Flow and Solute Transport in Converging-diverging Permeable Tubes [Volume 9, Issue 4, 2023, Pages 900-914]
-
Green's function
Bernoulli-Euler Beam Unsteady Bending Model with Consideration of Heat and Mass Transfer [Volume 9, Issue 1, 2023, Pages 168-180]
-
Guided waves
Comparative Study of the Spectral Method, DISPERSE and Other Classical Methods for Plotting the Dispersion Curves in Anisotropic Plates [Volume 9, Issue 4, 2023, Pages 955-973]
H
-
Hartmann number
Effect of Magnetic Field on Viscous Flow through Composite Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
-
HCCI Combustion
Potential of Semi-Empirical Heat Transfer Models in Predicting the Effects of Equivalence Ratio on Low Temperature Reaction and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
-
Heat conduction
An Exact Analytical Solution for Heat Conduction in a Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
-
Heat sink design
CFD Analyses and Comparison of the Effect of Industrial Heat Sinks in Subsea Control System (SCS) [Volume 9, Issue 1, 2023, Pages 95-112]
-
High Temperature Reaction Heat Release
Potential of Semi-Empirical Heat Transfer Models in Predicting the Effects of Equivalence Ratio on Low Temperature Reaction and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
-
Homogenization
Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
-
Hybrid composite
Theory and Experiment in Predicting the Strength of Hybrid Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
-
Hybrid nanofluid
Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid Nanofluid Natural Convection in a Partially Layered Porous Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
-
Hybrid Surrogate Model
Sweep Blade Design for an Axial Wind Turbine using a Surrogate-assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
I
-
Improved Runge-Kutta method
Numerical Simulation of Fuzzy Volterra Integro-differential Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
-
Incremental elastic deformations
Stability Analysis of an Inflated, Axially Extended, Residually Stressed Circular Cylindrical Tube [Volume 9, Issue 3, 2023, Pages 834-847]
-
Integral transform
Impact of Memory-dependent Response of a Thermoelastic Thick Solid Cylinder [Volume 9, Issue 4, 2023, Pages 1135-1143]
J
-
Jeffery fluid
A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
K
-
KDV equation
A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
L
-
Lane change (LC)
A Novel Flexible Lane Changing (FLC) Method in Complicated Dynamic Environment for Automated Vehicles [Volume 9, Issue 2, 2023, Pages 318-331]
-
Laplace transform
Bernoulli-Euler Beam Unsteady Bending Model with Consideration of Heat and Mass Transfer [Volume 9, Issue 1, 2023, Pages 168-180]
-
Lattice Boltzmann method
Temperature Effect on Moving Water Droplets at the Channel of PEMFC by Multi-component Multiphase Lattice Boltzmann Method [Volume 9, Issue 3, 2023, Pages 607-622]
-
Level Set Method
2D Planar Simulation of Collisions between Liquid Droplets and Solid Particles in a Gas [Volume 9, Issue 3, 2023, Pages 678-694]
-
Lithium-ion battery
Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
-
Longitudinal vibration
An Alternative Procedure for Longitudinal Vibration Analysis of Bars with Arbitrary Boundary Conditions [Volume 9, Issue 1, 2023, Pages 294-301]
-
Low-fidelity simulation
Sweep Blade Design for an Axial Wind Turbine using a Surrogate-assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
-
Low Temperature Reaction Heat Release
Potential of Semi-Empirical Heat Transfer Models in Predicting the Effects of Equivalence Ratio on Low Temperature Reaction and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
M
-
Magnetic field
Numerical Study on the Ferrofluid Droplet Splitting in a T-junction with Branches of Unequal Widths using Asymmetric Magnetic Field [Volume 9, Issue 2, 2023, Pages 357-370]
-
Marangoni convection
The Impact of Marangoni Convection and Radiation on Flow of Ternary Nanofluid in a Porous Medium with Mass Transpiration [Volume 9, Issue 2, 2023, Pages 487-497]
-
Mass
A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
-
Mass
A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
-
Material non-linearity
Delamination Analysis of Multilayered Functionally Graded Beams which Exhibit Non-linear Creep Behavior [Volume 9, Issue 4, 2023, Pages 935-944]
-
Melting process
Heat Transfer Improvement in a Thermal Energy Storage System using Auxiliary Fluid Instead of Nano-PCM in an Inclined Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
-
Memory-dependent derivatives
Impact of Memory-dependent Response of a Thermoelastic Thick Solid Cylinder [Volume 9, Issue 4, 2023, Pages 1135-1143]
-
Metallic dampers
Shape Optimization of Slotted Steel Plate Dampers using the Simulated Annealing Algorithm [Volume 9, Issue 3, 2023, Pages 870-883]
-
Meta Model
Sweep Blade Design for an Axial Wind Turbine using a Surrogate-assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
-
Microbial activity
Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
-
Modeling
Electrochemical and Mechanical Properties of Ni/g-C3N4 Nanocomposite Coatings with Enhanced Corrosion Protective Properties: A Case Study for Modeling the Corrosion Resistance by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
-
Moderately-thick cylinders
Vibration Analysis of Shear Deformable Cylindrical Shells Made of Heterogeneous Anisotropic Material with Clamped Edges [Volume 9, Issue 3, 2023, Pages 861-869]
-
Moderately-thick plate
Buckling Behavior of Nanocomposite Plates with Functionally Graded Properties under Compressive Loads in Elastic and Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
-
Monte Carlo Method
A New Approach for Exergoeconomics Evaluation by Considering Uncertainty with Monte Carlo Method [Volume 9, Issue 1, 2023, Pages 15-24]
-
Multibody system
Matrix Equations of the Motion of Multibody Systems with a Tree Structure in Hamiltonian Variables [Volume 9, Issue 4, 2023, Pages 1107-1121]
-
Multibody System Modeling
Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
-
Multilayered structure
Delamination Analysis of Multilayered Functionally Graded Beams which Exhibit Non-linear Creep Behavior [Volume 9, Issue 4, 2023, Pages 935-944]
-
Multiphase flow
Fluid-dynamic Simulations for Assessment of Dimensioning Methodologies of Pelton Turbine Buckets Considering the Initial Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
N
-
Nanocomposite
Buckling Behavior of Nanocomposite Plates with Functionally Graded Properties under Compressive Loads in Elastic and Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
-
Nano fluid
A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
-
Nanofluid
Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
-
Nanoparticle
Power Law Nanofluid through Tapered Artery based on a Consistent Couple Stress Theory [Volume 9, Issue 3, 2023, Pages 623-636]
-
Nanosecond pulsed discharge
A Reduced-Order Simulation Methodology for Nanosecond-Pulsed Plasmas in a Backward-Facing Step Supersonic Combustor Configuration [Volume 9, Issue 1, 2023, Pages 181-194]
-
Natural convection
Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid Nanofluid Natural Convection in a Partially Layered Porous Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
-
Natural frequency
Hemispherical Resonator of a Rate-integrating Gyroscope: A Novel Method for Determination of Eigenfrequencies and Eigenforms in Presence of Imperfections [Volume 9, Issue 4, 2023, Pages 915-925]
-
Navier-Stokes Equations
Prediction of the Supersonic Flow Base Pressure by Axisymmetric Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
-
Net present value (NPV)
Economic Evaluation of Supplying Commercial Thermal Load by a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
-
Ni nanocomposite coating
Electrochemical and Mechanical Properties of Ni/g-C3N4 Nanocomposite Coatings with Enhanced Corrosion Protective Properties: A Case Study for Modeling the Corrosion Resistance by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
-
NLFEA
Prediction of Interface Shear Strength of Heat Damaged Shear-keys using Nonlinear Finite Element Analysis [Volume 9, Issue 4, 2023, Pages 1000-1015]
-
Nonlinear dynamic analysis
A Novel Approach to Fully Nonlinear Mathematical Modeling of Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
-
Non-Linear dynamic analysis
Numerical Study of the Dynamic Response of Elevated Steel Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
-
Nonlinear elasticity
Stability Analysis of an Inflated, Axially Extended, Residually Stressed Circular Cylindrical Tube [Volume 9, Issue 3, 2023, Pages 834-847]
-
Nonlinear radiation
Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
-
Nonlinear Regulation and Tracking Control
Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
-
Non-Newtonian fluid
Flow Structure when Filling a Channel with a Curable Liquid [Volume 9, Issue 1, 2023, Pages 195-204]
-
Numerical Algorithms for Subspace State-Space System Identification (N4SID)
A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
-
Numerical Algorithms for Subspace State-Space System Identification (N4SID)
A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
-
Numerical simulation
Flow Structure when Filling a Channel with a Curable Liquid [Volume 9, Issue 1, 2023, Pages 195-204]
-
Numerical simulation
Influence of Thermal Radiation on Heat Transfer through a Hollow Block [Volume 9, Issue 2, 2023, Pages 419-429]
-
Numerical solution
Numerical Simulations of Spoiler’s Effect on a Hatchback and a Sedan Car Exposed to Crosswind Effect [Volume 9, Issue 2, 2023, Pages 346-356]
-
Numerical Study
Numerical Study of the Hydrodynamic Behavior of an Archimedes Screw Turbine by Experimental Data in order to Optimize Turbine Performance: The Genetic Algorithm [Volume 9, Issue 4, 2023, Pages 1060-1075]
O
-
Observer/Kalman Filter Identification Methods (OKID)
A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
-
Observer/Kalman Filter Identification Methods (OKID)
A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
-
OPGW cables
Self-damping of Optical Ground Wire Cables: A Bayesian Approach [Volume 9, Issue 1, 2023, Pages 205-216]
-
Optimization
Optimization of Spark Ignition Engine Performance using a New Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
-
Optimization
Numerical Study of the Hydrodynamic Behavior of an Archimedes Screw Turbine by Experimental Data in order to Optimize Turbine Performance: The Genetic Algorithm [Volume 9, Issue 4, 2023, Pages 1060-1075]
-
Ottosen’s failure surface
A Novel BESO Methodology for Topology Optimization of Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
P
-
Pantograph Scissor Lift Mechanism
Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
-
Particle size distribution
Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
-
Path planning
Time Distance: A Novel Collision Prediction and Path Planning Method [Volume 9, Issue 3, 2023, Pages 656-677]
-
Path planning
A Novel Flexible Lane Changing (FLC) Method in Complicated Dynamic Environment for Automated Vehicles [Volume 9, Issue 2, 2023, Pages 318-331]
-
Pelton Turbines
Fluid-dynamic Simulations for Assessment of Dimensioning Methodologies of Pelton Turbine Buckets Considering the Initial Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
-
Permeable wall
Mathematical Model of Fluid Flow and Solute Transport in Converging-diverging Permeable Tubes [Volume 9, Issue 4, 2023, Pages 900-914]
-
Phase change materials (PCMs)
Heat Transfer Improvement in a Thermal Energy Storage System using Auxiliary Fluid Instead of Nano-PCM in an Inclined Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
-
Piezoelectric material
Even and Uneven Porosities on Rotating Functionally Graded Variable-thickness Annular Disks with Magneto-electro-thermo-mechanical Loadings [Volume 9, Issue 3, 2023, Pages 695-711]
-
Piezoelectric material
Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
-
Planet Earth
A Novel Approach to Fully Nonlinear Mathematical Modeling of Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
-
Plasma assisted combustion
A Reduced-Order Simulation Methodology for Nanosecond-Pulsed Plasmas in a Backward-Facing Step Supersonic Combustor Configuration [Volume 9, Issue 1, 2023, Pages 181-194]
-
Plate fin heat sinks
CFD Analyses and Comparison of the Effect of Industrial Heat Sinks in Subsea Control System (SCS) [Volume 9, Issue 1, 2023, Pages 95-112]
-
Poisson momenta
Matrix Equations of the Motion of Multibody Systems with a Tree Structure in Hamiltonian Variables [Volume 9, Issue 4, 2023, Pages 1107-1121]
-
Polytope
Accuracy and Convergence Rate Comparative Investigation on Polytope Smoothed and Scaled Boundary Finite Element [Volume 9, Issue 1, 2023, Pages 226-238]
-
Poro-network models
Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
-
Porosity
Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
-
Porous layer.
Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid Nanofluid Natural Convection in a Partially Layered Porous Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
-
Porous piezoceramics
Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
-
Porous Structurers
Static Buckling of 2D FG Porous Plates Resting on Elastic Foundation based on Unified Shear Theories [Volume 9, Issue 1, 2023, Pages 239-258]
-
Push-off
Prediction of Interface Shear Strength of Heat Damaged Shear-keys using Nonlinear Finite Element Analysis [Volume 9, Issue 4, 2023, Pages 1000-1015]
R
-
Radiation
Influence of Thermal Radiation on Heat Transfer through a Hollow Block [Volume 9, Issue 2, 2023, Pages 419-429]
-
Radiation
The Impact of Marangoni Convection and Radiation on Flow of Ternary Nanofluid in a Porous Medium with Mass Transpiration [Volume 9, Issue 2, 2023, Pages 487-497]
-
Rayleigh solution
Hemispherical Resonator of a Rate-integrating Gyroscope: A Novel Method for Determination of Eigenfrequencies and Eigenforms in Presence of Imperfections [Volume 9, Issue 4, 2023, Pages 915-925]
-
Reinforced concrete
A Novel BESO Methodology for Topology Optimization of Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
-
Renewable energy
Economic Evaluation of Supplying Commercial Thermal Load by a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
-
Residual stresses
Stability Analysis of an Inflated, Axially Extended, Residually Stressed Circular Cylindrical Tube [Volume 9, Issue 3, 2023, Pages 834-847]
-
Rib
Numerical and Experimental Investigation on Post-buckling Behavior of Stiffened Cylindrical Shells with Cutout subject to Uniform Axial Compression [Volume 9, Issue 1, 2023, Pages 25-44]
-
RIG
Hemispherical Resonator of a Rate-integrating Gyroscope: A Novel Method for Determination of Eigenfrequencies and Eigenforms in Presence of Imperfections [Volume 9, Issue 4, 2023, Pages 915-925]
-
Ritz method
Hemispherical Resonator of a Rate-integrating Gyroscope: A Novel Method for Determination of Eigenfrequencies and Eigenforms in Presence of Imperfections [Volume 9, Issue 4, 2023, Pages 915-925]
-
RK-4th order
A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
-
R ratio
Multimode Fatigue Criteria for Filled Non-crystalizing Rubber under Positive R Ratios [Volume 9, Issue 4, 2023, Pages 1049-1059]
-
Rubber fatigue
Multimode Fatigue Criteria for Filled Non-crystalizing Rubber under Positive R Ratios [Volume 9, Issue 4, 2023, Pages 1049-1059]
S
-
Satellite
Natural Magneto-velocity Coordinate System for Satellite Attitude Stabilization: Dynamics and Stability Analysis [Volume 9, Issue 2, 2023, Pages 513-520]
-
Scattering
Calculation of Backscattered Ultrasonic Waves Field from a Copper-clad Steel Rod Immersing in Water and Effect of Clad Corrosion and Interfacial Disbond between Clad and Rod Defects on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
-
Scramjet
A Reduced-Order Simulation Methodology for Nanosecond-Pulsed Plasmas in a Backward-Facing Step Supersonic Combustor Configuration [Volume 9, Issue 1, 2023, Pages 181-194]
-
Semi-analytical polynomial method
A Novel Approach to Fully Nonlinear Mathematical Modeling of Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
-
Semi-Empirical Heat Transfer Models
Potential of Semi-Empirical Heat Transfer Models in Predicting the Effects of Equivalence Ratio on Low Temperature Reaction and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
-
Sharp-crested weirs
A Note on the Discharge over Full-width Rectangular Sharp-crested Weirs and Weirs of Finite Crest Length [Volume 9, Issue 2, 2023, Pages 458-463]
-
Shear-Key
Prediction of Interface Shear Strength of Heat Damaged Shear-keys using Nonlinear Finite Element Analysis [Volume 9, Issue 4, 2023, Pages 1000-1015]
-
Shooting technique
Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
-
SI engine
Optimization of Spark Ignition Engine Performance using a New Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
-
Singular Boundary Value Problem
A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
-
Size effect
Stress-driven Approach to Vibrational Analysis of FGM Annular Nano-plate based on First-order Shear Deformation Plate Theory [Volume 9, Issue 3, 2023, Pages 637-655]
-
SLAU
Performance Investigation of Simple Low-dissipation AUSM (SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
-
Soil-structure interaction
A Nonlinear Lagrangian Model for Plane Frames Pre-design [Volume 9, Issue 3, 2023, Pages 884-899]
-
Solar energy
Economic Evaluation of Supplying Commercial Thermal Load by a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
-
Spectral quasilinearization method (SQLM)
Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
-
Spoiler
Numerical Simulations of Spoiler’s Effect on a Hatchback and a Sedan Car Exposed to Crosswind Effect [Volume 9, Issue 2, 2023, Pages 346-356]
-
Stability
Driveline Stability in Racing Motorcycles: Analysis of a Three Degrees of Freedom Minimal Model [Volume 9, Issue 2, 2023, Pages 404-418]
-
Stability
Numerical Study of the Dynamic Response of Elevated Steel Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
-
Stability(Buckling/Postbuckling)
Numerical and Experimental Investigation on Post-buckling Behavior of Stiffened Cylindrical Shells with Cutout subject to Uniform Axial Compression [Volume 9, Issue 1, 2023, Pages 25-44]
-
Stagnation point
Exact Solutions for Isobaric Inhomogeneous Couette Flows of a Vertically Swirling Fluid [Volume 9, Issue 2, 2023, Pages 521-528]
-
Statics
Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
-
Steel conical tanks
Numerical Study of the Dynamic Response of Elevated Steel Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
-
Stiffness
A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
-
Stiffness
A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
-
Stirrups
Prediction of Interface Shear Strength of Heat Damaged Shear-keys using Nonlinear Finite Element Analysis [Volume 9, Issue 4, 2023, Pages 1000-1015]
-
Stress-jump condition
Effect of Magnetic Field on Viscous Flow through Composite Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
-
Stringer
Numerical and Experimental Investigation on Post-buckling Behavior of Stiffened Cylindrical Shells with Cutout subject to Uniform Axial Compression [Volume 9, Issue 1, 2023, Pages 25-44]
-
Structural Health Monitoring
Two-node Curved Inverse Finite Element Formulations based on Exact Strain-displacement Solution [Volume 9, Issue 1, 2023, Pages 259-273]
-
Subsea control system (SCS)
CFD Analyses and Comparison of the Effect of Industrial Heat Sinks in Subsea Control System (SCS) [Volume 9, Issue 1, 2023, Pages 95-112]
-
Supersonic Flow
A Reduced-Order Simulation Methodology for Nanosecond-Pulsed Plasmas in a Backward-Facing Step Supersonic Combustor Configuration [Volume 9, Issue 1, 2023, Pages 181-194]
-
Supplemental fluid
Heat Transfer Improvement in a Thermal Energy Storage System using Auxiliary Fluid Instead of Nano-PCM in an Inclined Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
-
Surface interfacial disbond
Calculation of Backscattered Ultrasonic Waves Field from a Copper-clad Steel Rod Immersing in Water and Effect of Clad Corrosion and Interfacial Disbond between Clad and Rod Defects on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
-
Sutterby nanofluid
Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
-
Swelling
Bifurcation of Fiber-Reinforced Cylindrical Membranes under Extension, Inflation, and Swelling [Volume 9, Issue 1, 2023, Pages 113-128]
-
System of Burgers Equation
A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
T
-
Taylor Series
A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
-
Tectonics plates
A Novel Approach to Fully Nonlinear Mathematical Modeling of Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
-
Temperature
Prediction of Interface Shear Strength of Heat Damaged Shear-keys using Nonlinear Finite Element Analysis [Volume 9, Issue 4, 2023, Pages 1000-1015]
-
Temperature
Impact of Memory-dependent Response of a Thermoelastic Thick Solid Cylinder [Volume 9, Issue 4, 2023, Pages 1135-1143]
-
Thermal loading
Even and Uneven Porosities on Rotating Functionally Graded Variable-thickness Annular Disks with Magneto-electro-thermo-mechanical Loadings [Volume 9, Issue 3, 2023, Pages 695-711]
-
Thermal modeling
Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
-
Thermal non-equilibrium model
Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid Nanofluid Natural Convection in a Partially Layered Porous Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
-
Thermal radiation
A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
-
Thermoelastic diffusion
Bernoulli-Euler Beam Unsteady Bending Model with Consideration of Heat and Mass Transfer [Volume 9, Issue 1, 2023, Pages 168-180]
-
Time-dependent behaviour
Delamination Analysis of Multilayered Functionally Graded Beams which Exhibit Non-linear Creep Behavior [Volume 9, Issue 4, 2023, Pages 935-944]
-
Topology Optimization
A Novel BESO Methodology for Topology Optimization of Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
-
Topology Optimization
Investigation of Driving Torques at the Joints of Industrial Robot Arms based on the Topology Optimization Technique [Volume 9, Issue 3, 2023, Pages 820-833]
-
Tube bifurcation
Stability Analysis of an Inflated, Axially Extended, Residually Stressed Circular Cylindrical Tube [Volume 9, Issue 3, 2023, Pages 834-847]
-
Turbine Blade
Performance Investigation of Simple Low-dissipation AUSM (SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
U
-
Ultrafiltration
Mathematical Model of Fluid Flow and Solute Transport in Converging-diverging Permeable Tubes [Volume 9, Issue 4, 2023, Pages 900-914]
-
Ultrasonic
Comparative Study of the Spectral Method, DISPERSE and Other Classical Methods for Plotting the Dispersion Curves in Anisotropic Plates [Volume 9, Issue 4, 2023, Pages 955-973]
-
Ultrasonic Waves
Calculation of Backscattered Ultrasonic Waves Field from a Copper-clad Steel Rod Immersing in Water and Effect of Clad Corrosion and Interfacial Disbond between Clad and Rod Defects on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
-
Uncertainty quantification
Self-damping of Optical Ground Wire Cables: A Bayesian Approach [Volume 9, Issue 1, 2023, Pages 205-216]
-
Unified Plate Theories
Static Buckling of 2D FG Porous Plates Resting on Elastic Foundation based on Unified Shear Theories [Volume 9, Issue 1, 2023, Pages 239-258]
-
Unmanned aerial vehicles
A Bridge Vibration Measurement Method by UAVs based on CNNs and Bayesian Optimization [Volume 9, Issue 3, 2023, Pages 749-762]
-
Upwind Scheme
Performance Investigation of Simple Low-dissipation AUSM (SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
V
-
Variable viscosity/thermal conductivity
Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
-
Verification and validation
Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
-
Vertical acceleration
Numerical Study of the Dynamic Response of Elevated Steel Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
-
Vibration
Vibration Analysis of Shear Deformable Cylindrical Shells Made of Heterogeneous Anisotropic Material with Clamped Edges [Volume 9, Issue 3, 2023, Pages 861-869]
-
Vibration
Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
-
Viscoelastic materials
Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
-
Volatile organic compounds
Smart Gas Sensors: Materials, Technologies, Practical Applications, and Use of Machine Learning – A Review [Volume 9, Issue 3, 2023, Pages 775-803]
-
Vorticity
Exact Solutions for Isobaric Inhomogeneous Couette Flows of a Vertically Swirling Fluid [Volume 9, Issue 2, 2023, Pages 521-528]
Z
-
Zero-Dimensional Single-Zone Model
Potential of Semi-Empirical Heat Transfer Models in Predicting the Effects of Equivalence Ratio on Low Temperature Reaction and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
Your query does not match with any item